GMC Acadia Denali 2012 Owner'S Manual Download Page 17

Page: 17 / 456

Black plate (11,1)

GMC Acadia/Acadia Denali Owner Manual - 2012

In Brief

1-11

The passenger airbag status
indicator will be visible on the
instrument panel when the vehicle is
started. See

Passenger Sensing

System on page 3

‑

for more

information.

Mirror Adjustment

Exterior Mirrors

Base Model

To adjust the mirrors:

1. Press

to select a mirror.

2. Press the control pad to adjust

the mirror.

3. Return the switch to the center

to deselect the mirror.

Uplevel Model

To adjust the mirrors:

1. Press (A) or (B) to select a

mirror.

2. Press the control pad to adjust

the mirror.

3. Press (A) or (B) again to

deselect the mirror.

Folding Mirrors

For vehicles with manual folding
mirrors, push the mirror toward the
vehicle. Pull the mirror out to return
to its original position.

For vehicles with power folding
mirrors:

1. Press (A) to fold the mirrors out

to the driving position.

2. Press (B) to fold the mirrors in to

the folded position.

See

Folding Mirrors on page 2

‑

Summary of Contents for Acadia Denali 2012









































































































































































































































































































































































































































































Search results

Summary of Contents for Acadia Denali 2012

Reviews:

GMC Acadia Denali 2012, Owner'S Manual, Page: 17 / 456

Search results

Summary of Contents for Acadia Denali 2012

Reviews: