Home
/
GMC
/
Acadia Denali 2012
/
Owner'S Manual

GMC Acadia Denali 2012, Owner'S Manual, Page: 164 / 456

Share

Page: 164 / 456

GMC Acadia Denali 2012 Owner'S Manual Download Page 164

Black plate (48,1)

GMC Acadia/Acadia Denali Owner Manual - 2012

5-48

Instruments and Controls

Press the customization button until
DELAY DOOR LOCK appears on
the DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
customization button to scroll
through the following settings:

OFF:

There will be no delayed

locking of the vehicle's doors.

ON (default):

The doors will not

lock until five seconds after the last
door or the liftgate is closed.

NO CHANGE:

No change will be

made to this feature. The current
setting will remain.

To select a setting, press the
set/reset button while the desired
setting is displayed on the DIC.

EXIT LIGHTING

This feature allows you to select
the amount of time you want the
exterior lamps to remain on when
it is dark enough outside. This
happens after the key is turned from
ON/RUN to LOCK/OFF.

Press the customization button
until EXIT LIGHTING appears on
the DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
customization button to scroll
through the following settings:

OFF:

The exterior lamps will not

turn on.

30 SECONDS (default):

The

exterior lamps will stay on for
30 seconds.

1 MINUTE:

The exterior lamps will

stay on for one minute.

2 MINUTES:

The exterior lamps will

stay on for two minutes.

NO CHANGE:

No change will be

made to this feature. The current
setting will remain.

To select a setting, press the
set/reset button while the desired
setting is displayed on the DIC.

APPROACH LIGHTING

This feature allows you to select
whether or not to have the exterior
lights turn on briefly during low light
periods after unlocking the vehicle
using the Remote Keyless Entry
(RKE) transmitter.

Press the customization button until
APPROACH LIGHTING appears on
the DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
customization button to scroll
through the following settings:

OFF:

The exterior lights will not

turn on when you unlock the vehicle
with the RKE transmitter.

ON (default):

If it is dark enough

outside, the exterior lights will turn
on briefly when you unlock the
vehicle with the RKE transmitter.

«
...
162
163
164
165
166
...
»

Summary of Contents for Acadia Denali 2012









































































































































































































































































































































































































































































Reviews:

No comments