GMC Acadia Denali 2012 Owner'S Manual Download Page 15 | Manualshive

Page: 15 / 456

GMC Acadia Denali 2012 Owner'S Manual Download Page 15

Black plate (9,1)

GMC Acadia/Acadia Denali Owner Manual - 2012

In Brief

1-9

Third Row Seats

The third row seatbacks can be
folded forward, and the seats can
be removed.

To fold the third row seatback:

1. Remove anything on or under

the seat.

2. Disconnect the rear safety belt

mini-latch using a key in the slot
on the mini-buckle, and let the
belt retract into the headliner.
Stow the mini-latch in the holder
in the headliner.

3. Pull up on the release lever on

the back of the seat.

4. Push the seatback forward to

lay flat.

See

Third Row Seats on page 3

‑

11

for more information.

Heated and Ventilated
Seats

Heated and Cooled Seat Buttons

Shown, Heated Seat Buttons

Similar

If available, the buttons are on the
center console. To operate, the
engine must be running.

I

:

If available, press to heat the

seatback only.

H

:

If available, press to cool the

entire seat.

J

:

Press to heat the seat and

seatback.

«
...
13
14
15
16
17
...
»

Summary of Contents for Acadia Denali 2012









































































































































































































































































































































































































































































Reviews:

No comments