Black plate (24,1)
GMC Canyon Owner Manual (GMNA-Localizing-U.S./Canada-7587000) -
2015 - CRC - 6/25/14
7-24
Infotainment System
The restriction is that the command
“
Play Song
”
must be spoken first;
the system will then ask for the song
name. The reply command would be
to say the name of the song to play.
Similar limits exist for album
content. If there are more than
4,000 albums, but less than 8,000,
the content cannot be accessed
directly with one command like,
“
Play <album name>.
”
The
command
“
Play Album
”
must first be
spoken; the system will then ask for
the album name. The reply would
be to say the name of the album
to play.
Once the number of songs has
exceeded approximately 8,000,
there is no support for accessing the
songs directly through voice
commands. There will still be
access to the media content by
using commands for playlists,
artists, and genres.
The access commands for playlists,
artists, and genres are prohibited
after the number of this type of
media exceeds 4,000.
The system will provide feedback
the first time voice recognition is
initiated if it has become apparent
that any of these limits are reached
during a device initializing process.
Voice Recognition for the
Phone
“
Call <contact name>
”
:
Initiate a
call to an entered contact. The
command may include location if
the contact has location numbers
stored.
“
Call <contact name> At Home,
”
“
At Work,
” “
On Mobile,
”
or
“
On
Other
”
:
Initiate a call to an entered
contact and location at home, at
work, on mobile device, or on
another phone.
“
Call <phone number>
”
:
Initiate a
call to a standard phone number
seven or 10 digits in length, and
also 911, 411, or 611.
“
Pair Phone
”
:
Begins the
Bluetooth pairing process. Follow
instructions on the radio display.
“
Switch Phone
”
:
Select a different
phone for outgoing calls.
“
Voice Keypad
”
:
Begins a dialog
to enter special numbers like
international numbers. The numbers
can be entered in groups of digits
with each group of digits being
repeated back by the system. If the
group of digits is not correct, the
command
“
Delete
”
will remove the
last group of digits and allow them
to be re-entered. Once the entire
number has been entered, the
command
“
Call
”
will start dialing the
number.
“
Voice Mail
”
:
Initiate a call to voice
mail numbers.
Voice Recognition for OnStar
(If Equipped)
“
OnStar
”
:
Begin OnStar Voice
Recognition.
