Home
/
GMC
/
2014 Terrain
/
Owner'S Manual

GMC 2014 Terrain, Owner'S Manual, Page: 102 / 360

Share

Page: 102 / 360

GMC 2014 Terrain Owner'S Manual Download Page 102

Black plate (4,1)

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-6081485) - 2014 - CRC - 12/6/13

4-4

Storage

Push the lever down to completely
engage into the side rail holes. If the
lever is not tight, then the crossrail
is not engaged in a side rail hole.

Slide the crossrails back and forth
until the lock pins engage in the
holes and a click is heard as the
pins align and the crossrail locks.

Try sliding the crossrails forward
and backward to ensure that they
are correctly secured and that the
levers stay tight to the crossrails.

Do not stand on the plastic lower
body panels when loading cargo on
the roof rack.

When the roof rack is not in use,
lock one crossrail at the furthest
forward position and lock the other
crossrail at the furthest rearward
position to reduce wind noise.

«
...
100
101
102
103
104
...
»

Summary of Contents for 2014 Terrain









































































































































































































































































































































































Reviews:

No comments