Black plate (51,1)
GMC Sierra Owner Manual - 2013 - crc - 8/14/12
Seats and Restraints
3-51
1.3. Remove the cover to
expose the anchor.
1.4. Route, attach, and tighten
the top tether according to
your child restraint
instructions and the
following instructions:
If the position you are using
has an adjustable headrest
or head restraint and you
are using a dual tether,
route the tether around the
headrest or head restraint.
If the position you are using
has an adjustable headrest
or head restraint and you
are using a single tether,
raise the headrest or head
restraint and route the
tether under the headrest or
head restraint and in
between the headrest or
head restraint posts.
2. See
(Center Front Seat Position) on
page 3
or
Restraints (Right Front Seat
Position) on page 3
or
Securing Child Restraints (Rear
Seat Position) on page 3
for
instructions on installing the
child restraint using the safety
belts.
3. Before placing a child in the
child restraint, make sure it is
securely held in place. To check,
grasp the child restraint at the
LATCH path and attempt to
move it side-to-side and
back-and-forth. There should be
no more than 2.5 cm (1 in) of
movement for proper installation.