GMC 2012 GMC Sierra Denali, Owner'S Manual

Page: 389 / 502

Black plate (51,1)
GMC Sierra Denali Owner Manual - 2012 - 2nd - 11/10/11
Vehicle Care 10-51
Tire Designations
Tire Size
The examples show a typical
passenger vehicle and light
truck tire size.
Passenger (P ‐ Metric) Tire
(A) Passenger (P ‐ Metric) Tire
:
The United States version of a
metric tire sizing system. The
letter P as the first character in
the tire size means a passenger
vehicle tire engineered to
standards set by the U.S. Tire
and Rim Association.
(B) Tire Width
:
The three ‐ digit
number indicates the tire section
width in millimeters from
sidewall to sidewall.
(C) Aspect Ratio
:
A two ‐ digit
number that indicates the tire
height
‐ to ‐ width measurements.
For example, if the tire size
aspect ratio is 75, as shown in
item C of the tire illustration, it
would mean that the tire's
sidewall is 75 percent as high as
it is wide.
(D) Construction Code
:
A
letter code is used to indicate
the type of ply construction in
the tire. The letter R means
radial ply construction; the
letter D means diagonal or bias
ply construction; and the letter B
means belted
‐ bias ply
construction.
(E) Rim Diameter
:
Diameter of
the wheel in inches.
(F) Service Description
:
These
characters represent the load
index and speed rating of the
tire. The load index represents
the load carrying capacity a tire
is certified to carry. The speed
rating is the maximum speed a
tire is certified to carry a load.
Light Truck (LT ‐ Metric) Tire
(A) Light Truck (LT ‐ Metric)
Tire
:
The United States version
of a metric tire sizing system.
The letters LT as the first two
characters in the tire size mean
a light truck tire engineered to
standards set by the U.S. Tire
and Rim Association.