GMC 2006 Sierra Hybrid, Getting To Know Manual, Page: 9 / 20

9
There are two ways to increase speed
while cruising:
• Use the accelerator pedal to get to a
higher speed. Press at the end of
the multifunction lever to set the
cruising speed. Release the accelera-
tor pedal.
• Press the resume/accelerate switch
(
+
) to increase speed, and then
release the switch.
To reduce speed while cruising:
• Press and hold at the end of the
multifunction lever until you reach the
desired lower speed, and then
release it.
See Section 3 of your Owner Manual.
Power Folding Mirrors
(if equipped)
Fold mirrors
• Move the
selector switch
located above
the mirror con-
trol (“A” right)
to the center
position.
• Press the right
side of the
four-way
control pad (“B” above) to fold in the
mirrors.
• Press the left side of the four-way
control pad to fold out the mirrors.
If the mirrors have been folded manual-
ly, they must be moved through the
power folding cycle three times to reset
them in their tracks.
See Section 2 of your Owner Manual.
A
B
Automatic Headlamp Controls
Turn off Daytime Running Lamps
(DRL) and automatic headlamps
• Turn the exterior lamps knob (located
to the left of the steering wheel) to
Off ( ) and release.
Activate the automatic headlamp
system
• Turn the exterior lamps knob to
AUTO. The automatic headlamp sys-
tem will turn on the front and rear
lamps.
Manually illuminate the parking
lamps, side-marker lamps, taillamps,
instrument panel/radio lights, license
plate lamps and roof marker lamps
(if equipped)
• Turn the exterior lamps knob to the
parking lamp position ( ).
Manually activate the headlamps, all
exterior tail/side-marker lamps and
the instrument panel/radio lights
• Turn the exterior lamps knob to this
position ( ).
Note: Your DRLs or automatic head-
lamps will re-engage at the next key
cycle.