GMC 2006 Sierra Hybrid, Getting To Know Manual, Page: 7 / 20

7
• Insert the disc partway into the slot,
label side up; the player will pull the
disc in.
Load multiple CDs
• Turn the ignition on; then press and
hold the LOAD button for two sec-
onds. The unit beeps and the light to
the right of the slot begins to flash.
• When the light stops flashing and
turns green, insert a disc partway,
label side up.
• The indicator light will begin blinking
and then turn green. Load another
disc at this time.
• When more than one disc is loaded,
a number for each disc is displayed.
• To load more than one but fewer than
six discs, press the LOAD button
again after loading the final CD.
• For every CD loaded, a number
appears on the radio display.
• To play a specific CD, press the CD
AUX button and then the number of
the CD you want to hear.
• A small bar appears under the CD
number that is playing, and the track
number appears.
Access Program Type Selections for
Six-Disc CD Changer
• To turn Program Type on, press the
TYPE button once.
• Turn the TYPE turn knob or press the
TYPE button to select the Program
Type you want.
• Press the SEEK or TYPE arrows and
the radio seeks the first available
RDS broadcast of the selected
Program Type.
• To turn Program Type off (while
seeking), press the SEEK or TYPE
arrows, or wait for the seek to
complete. All stations will now be
available when you press the SEEK
button.
See Section 3 of your Owner Manual.
Note: CDs with any affixed labels may
jam in the CD player. Label a CD using
a permanent marker. If more than one
CD is inserted into the slot at one time,
or if scratched or damaged CDs are
played, the CD player could be dam-
aged. When using the CD player, use
only CDs in good condition without
labels; load one CD at a time; and keep
the CD player and the loading slot free
of foreign materials, liquids and debris.