GMC 2005 Sierra Denali Page 292 Owner'S Manual Download

Page: 292 / 428

Replacing the Engine Air Cleaner/Filter
and Resetting the Air Filter Restriction
Indicator

1. Locate the air cleaner/filter assembly on the front

corner of the engine compartment on the
passenger’s side of the vehicle.

2. Loosen the screws on the cover of the housing and

lift up the cover.

3. Remove the engine air cleaner/filter from the

housing. Care should be taken to dislodge as
little dirt as possible.

4. Clean the engine air cleaner/filter sealing surfaces

and the housing.

5. Inspect or replace the engine air cleaner/filter.

6. Reinstall the cover and tighten the screws.

7. Reset the air filter restriction indicator, if equipped,

by pressing the top button on the indicator.

5-20

Summary of Contents for 2005 Sierra Denali













































































































































































































































































































































































































































Search results

Summary of Contents for 2005 Sierra Denali

Reviews:

Related manuals for 2005 Sierra Denali

Brands by name

Popular brands

GMC 2005 Sierra Denali, Owner'S Manual

Search results

Summary of Contents for 2005 Sierra Denali

Reviews:

Related manuals for 2005 Sierra Denali

Brands by name

Popular brands