manualshive.com logo in svg

GMC 2002 Yukon XL, Owner'S Manual, Page: 349 / 443

Share
Download
GMC 2002 Yukon XL Owner'S Manual Download Page 349

6-28

How to Check Lubricant

1500 Series shown, 2500 and 3500 Series similar

To get an accurate reading, the vehicle should be on a
level surface.

The proper level for the 1500 Series is from 5/8 inch to
1 5/8 inch (15 mm to 40 mm) below the bottom of the
filler plug hole. The proper level for the 2500 Series is
from 0 to 3/8 inch (0 to 10 mm) below the bottom of the
filler plug hole. Add only enough fluid to reach the
proper level.

What to Use

Refer to the Maintenance Schedule to determine what
kind of lubricant to use. See “Recommended Fluids and
Lubricants” in the Index.

Four

-

Wheel Drive

Lubricant checks in this section also apply to these
vehicles. However, there are two additional systems that
need lubrication.

Transfer Case

When to Check Lubricant

Refer to the Maintenance Schedule to determine how
often to check the lubricant. See “Periodic Maintenance
Inspections” in the Index.

Summary of Contents for 2002 Yukon XL




























































































































































































































































































































































































































































Reviews:

No comments