Home
/
GMC
/
2002 Yukon XL
/
Owner'S Manual

GMC 2002 Yukon XL, Owner'S Manual, Page: 336 / 443

Share

Page: 336 / 443

GMC 2002 Yukon XL Owner'S Manual Download Page 336

6-15

Engine Oil

If the CHECK ENG OIL
LEVEL message appears
on the instrument cluster,
it means you need to
check your engine oil
level right away.

For more information, see “CHECK ENG OIL LEVEL”
in the Index.

You should check your engine oil level regularly; this is
an added reminder.

Checking Engine Oil

It’s a good idea to check your engine oil every time you
get fuel. In order to get an accurate reading, the oil must
be warm and the vehicle must be on level ground.

8100 Engines

All Other Engines

The engine oil dipstick has a yellow ring handle and
is located in the engine compartment on the
passenger’s side of the vehicle. See “Engine
Compartment Overview” in the Index for more
information on location.

«
...
334
335
336
337
338
...
»

Summary of Contents for 2002 Yukon XL




























































































































































































































































































































































































































































Reviews:

No comments