GMC 2002 Yukon XL Owner'S Manual Download Page 291

Page: 291 / 443

5-8

Jumper Cable Removal

A. Heavy, Unpainted Metal Engine Part or Remote

Negative Terminal

B. Good Battery or Remote Positive (+) and Remote

Negative (

) Terminals

C. Dead Battery or Remote Positive (+) Terminal

To disconnect the jumper cables from both vehicles do
the following:

1. Disconnect the black negative (

) cable from the

vehicle that had the bad battery.

2. Disconnect the black negative (

) cable from vehicle

with the good battery.

3. Disconnect the red positive (+) cable from the

vehicle with the good battery.

4. Disconnect the red positive (+) cable from the

other vehicle.

5. Return the positive (+) remote terminal cover to its

original position.

Summary of Contents for 2002 Yukon XL



























































































































































































































































































































































































































































Search results

Summary of Contents for 2002 Yukon XL

Reviews:

GMC 2002 Yukon XL, Owner'S Manual, Page: 291 / 443

Search results

Summary of Contents for 2002 Yukon XL

Reviews: