manualshive.com logo in svg

GMC 2002 Yukon XL, Owner'S Manual, Page: 283 / 443

Share
Download
GMC 2002 Yukon XL Owner'S Manual Download Page 283

4-72

Four Wire Trailer Harness Adapter

If you need to tow a light

-

duty trailer with a standard

four

-

way round pin connector, an adapter connector is

included with your vehicle.

Connect the adapter with
the tab (arrow) pointing
toward the top. The cap 
on the wiring harness will
lock onto the tab (arrow)
and help hold the adapter 
in place.

Power Winches

If you wish to use a power winch on your vehicle, only
use it when your vehicle is stationary or anchored.

NOTICE:

Using a power winch with the transmission in
gear may damage the transmission. When
operating a power winch, always leave the
transmission in NEUTRAL (N).

Use the regular brakes, set the parking brake, or block
the wheels to keep your vehicle from rolling.

Step-Bumper Pad

Your vehicle has a rear step bumper, it is equipped with
a rear step pad at the center of the bumper.

If you will be using the
bumper to tow a trailer, you
must remove the center
cutout circle to install the
trailer ball.

Summary of Contents for 2002 Yukon XL




























































































































































































































































































































































































































































Reviews:

No comments