manualshive.com logo in svg

GMC 2002 Yukon XL, Owner'S Manual, Page: 239 / 443

Share
Download
GMC 2002 Yukon XL Owner'S Manual Download Page 239

4-28

Q:

Suppose, after stalling, I try to back down 
the hill and decide I just can’t do it. What
should I do?

A:

Set the parking brake, put your transmission in
PARK (P) and turn off the engine. Leave the
vehicle and go get some help. Exit on the uphill
side and stay clear of the path the vehicle would
take if it rolled downhill. Do not shift the transfer
case to NEUTRAL when you leave the vehicle.
Leave it in some gear.

CAUTION:

Shifting the transfer case to NEUTRAL can
cause your vehicle to roll even if the transmission
is in PARK (P). This is because the NEUTRAL
position on the transfer case overrides the
transmission. You or someone else could be
injured. If you are going to leave your vehicle, 
set the parking brake and shift the transmission
to PARK (P). But do not shift the transfer case 
to NEUTRAL. Leave the transfer case in the 
2 Wheel High, 4 High or 4 Low position.

Summary of Contents for 2002 Yukon XL




























































































































































































































































































































































































































































Reviews:

No comments