manualshive.com logo in svg

GMC 2002 Yukon XL, Owner'S Manual, Page: 199 / 443

Share
Download
GMC 2002 Yukon XL Owner'S Manual Download Page 199

3-19

AM-FM Stereo with Compact Disc Player
and Automatic Tone Control (If Equipped)

Playing the Radio

PWR (Power): Press this knob to turn the system on
and off.

VOL (Volume): Turn this knob clockwise to increase
volume. Turn it counterclockwise to decrease volume.
The knob is capable of rotating continuously.

SCV (Speed

-

Compensated Volume): With SCV, 

your audio system adjusts automatically to make up for
road and wind noise as you drive. Set the volume at the
desired level. Turn the control ring behind the upper
knob clockwise to adjust the SCV. Each notch on the
control ring allows for more volume compensation at
faster vehicle speeds. Then, as you drive, SCV
automatically increases the volume, as necessary, to
overcome noise at any speed. The volume level should
always sound the same to you as you drive. If you don’t
want to use SCV, turn the control all the way down.

RECALL: Pressing this button will display the station
being played or it will display the clock. Clock display
is available with the ignition turned off.

Finding a Station

AM FM: Press this button to switch between AM, 
FM1 and FM2. The display will show your selection.

TUNE: Press this knob lightly so it extends. Turn it to
choose radio stations. Push the knob back into its stored
position when you’re not using it.

Summary of Contents for 2002 Yukon XL




























































































































































































































































































































































































































































Reviews:

No comments