manualshive.com logo in svg

GMC 2001 Sierra 1500 Pickup, Owner'S Manual, Page: 305 / 468

Share
Download
GMC 2001 Sierra 1500 Pickup Owner'S Manual Download Page 305

4-83

Using PTO speed control in Preset Mode 
(Factory Setting):

1. Engage the PTO.

2. Select PARK (P) or NEUTRAL (N) range. 

Apply the parking brake in NEUTRAL (N) is
selected. Torque Converter Clutch (TCC) lockup is
not available in NEUTRAL (N) and is available only
in PARK when engine speed is above 1100 rpm.

3. Make sure your foot is off the brake pedal 

(and off the clutch on vehicles equipped with a
manual transmission). Select the desired engine
speed for PTO operation. Please read the following
Preset Mode information regarding operation.

Preset Mode: PTO speed control mode is used for
stationary applications. This mode provides a default
standby speed of 800 or 850 rpm (depending on the
engine/transmission combination) and two default PTO
control speeds which follow:
D PTO Fast Idle Speed of 1250 rpm, or
D PTO Fast Idle Resume Speed of 1700 rpm.
Standby speed (800/850 rpm) is not to be used as a 
PTO control speed. Vehicles not equipped with cruise
control will not have the resume speed capability.

Using PTO speed control in Variable Mode (Mobile):

1. Engage the PTO.

2. Vehicle speed must be greater than 5 mph for vehicles

equipped with gasoline engines or greater than 0 mph
for vehicles equipped with diesel engines.

3. Make sure your foot is off the brake pedal 

(and off the clutch for vehicles equipped with a
manual transmission).

4. Select the desired engine speed (with the foot pedal)

and select SET on the PTO switch or with the 
cruise control.

Using PTO speed control in Variable 
Mode (Stationary):

1. Engage the PTO.

2. Vehicle speed must be less than 5 mph for vehicles

equipped with gasoline engines or at 0 mph for
vehicles equipped with diesel engines.

3. Make sure your foot is off the brake pedal 

(and off the clutch for vehicles equipped with a
manual transmission).

4. Select the desired engine speed (with the foot pedal)

and select SET on the PTO switch or with the 
cruise control.

Summary of Contents for 2001 Sierra 1500 Pickup





















































































































































































































































































































































































































































































Reviews:

No comments