manualshive.com logo in svg

GMC 2001 C3, Owner'S Manual, Page: 293 / 388

Share
Download
GMC 2001 C3 Owner'S Manual Download Page 293

6-17

Engine Air Cleaner/Filter

The air cleaner assembly
has a restriction indicator
that lets you know when 
the engine air cleaner/filter
is dirty and needs to be
serviced. The indicator 
is located on the air 
cleaner cover.

See “Owner Checks and Services” in the Index to
determine when to check the indicator.

If the area inside the clear section of the indicator 
is not completely yellow, no engine air cleaner/filter
service is required. When the area inside the indicator 
is completely yellow, past the red band, the words
CHANGE FILTER will be highlighted. After changing
the engine air cleaner/filter, press the top button on the
indicator to reset it.

The air cleaner assembly is located on the front corner
of the engine compartment on the passenger’s side. See
“Engine Compartment Overview” in the Index for more
information on location.

Summary of Contents for 2001 C3





































































































































































































































































































































































































Reviews:

No comments