Home
/
GMC
/
2001 C3
/
Owner'S Manual

GMC 2001 C3, Owner'S Manual, Page: 288 / 388

Share

Page: 288 / 388

GMC 2001 C3 Owner'S Manual Download Page 288

6-12

Engine Oil

If the CHECK ENG OIL
LEVEL light appears on the
instrument panel, it means
you need to check your
engine oil level right away.

For more information, see CHECK ENG OIL LEVEL
in the Index.

You should check your engine oil level regularly; this is
an added reminder.

Checking Engine Oil

It’s a good idea to check your engine oil every time you
get fuel. In order to get an accurate reading, the oil must
be warm and the vehicle must be on level ground.

The engine oil dipstick has
a yellow loop and is located
on the passenger’s side of
the engine.

See “Engine Compartment Overview” in the Index for
more information on location.

«
...
286
287
288
289
290
...
»

Summary of Contents for 2001 C3





































































































































































































































































































































































































Reviews:

No comments