manualshive.com logo in svg

GMC 2000 Sierra 1500 Pickup, Owner'S Manual, Page: 76 / 421

Share
Download
GMC 2000 Sierra 1500 Pickup Owner'S Manual Download Page 76

yellow

blue     

1-64

CAUTION:

Never do this.

Here a child is sitting in a seat that has a
lap

-

shoulder belt, but the shoulder part is behind

the child. If the child wears the belt in this way, in
a crash the child might slide under the belt. The
belt’s force would then be applied right on the
child’s abdomen. That could cause serious or
fatal injuries.

Wherever the child sits, the lap portion of the belt
should be worn low and snug on the hips, just touching
the child’s thighs. This applies belt force to the child’s
pelvic bones in a crash.

Summary of Contents for 2000 Sierra 1500 Pickup






































































































































































































































































































































































































































Reviews:

No comments