manualshive.com logo in svg

GMC 2000 Sierra 1500 Pickup, Owner'S Manual, Page: 177 / 421

Share
Download
GMC 2000 Sierra 1500 Pickup Owner'S Manual Download Page 177

yellow

blue     

3-9

AM-FM Stereo

Playing the Radio

VOLUME: This knob turns the system on and off 
and controls the volume. To increase volume and 
turn the radio on, turn the knob clockwise. Turn it
counterclockwise to decrease volume and turn the 
radio off.

RECALL: Display the time with the ignition off by
pressing the recall knob. When the radio is playing,
press this knob to recall the station frequency.

Finding a Station

AM

-

FM: Press the lower knob to switch between AM

and FM. The display shows your selection.

TUNE: Turn the lower knob to tune in radio stations.

SEEK: Press the right arrow to tune to the next higher
station and the left arrow to tune to the next lower
station and stay there.

SCAN: Select either AM, FM1 or FM2 mode and press
both SEEK buttons to listen to a few seconds of each
radio station. SCAN will light up on the display. The
radio will automatically SCAN to the next higher
station, play that station for a few seconds, then SCAN
to the next higher station. Press VOLUME or both
SEEK buttons to stop scanning.

Summary of Contents for 2000 Sierra 1500 Pickup






































































































































































































































































































































































































































Reviews:

No comments