manualshive.com logo in svg

GMC 2000 Sierra 1500 Pickup, Owner'S Manual

The GMC 2000 Sierra 1500 Pickup Owner's Manual is a comprehensive guide that provides detailed information on operating and maintaining this reliable truck. Easily download this essential manual for free from manualshive.com, ensuring you have all the necessary instructions and tips at your fingertips to maximize the performance of your GMC Sierra.

Share
Download
background image

yellow

blue     

2-76

You can only drive for a short time with the reading in
either warning zone. If you must drive, turn off all
unnecessary accessories.

Readings in either warning zone indicate a possible
problem in the electrical system. Have the vehicle
serviced as soon as possible.

Shift Light (If Equipped)

This light is used on 
some models with 
manual transmissions.

The SHIFT indicator light will help you get the best fuel
economy. See “Shift Light” or “Shift Speeds” in the
index for more information.

Brake System Warning Light

With the ignition on, the brake system warning light 
will flash when you set the parking brake. The light will
flash if the parking brake doesn’t release fully. If you 
try to drive with the parking brake engaged, a chime 
will sound when the vehicle speed is greater than 
3 mph (5 km/h).

Your vehicle’s hydraulic brake system is divided into
two parts. If one part isn’t working, the other part can
still work and stop you. For good braking, though, you
need both parts working well.

If the warning light comes on, there could be a brake
problem. Have your brake system inspected right away.

This light should come 
on briefly when you turn 
the ignition key to RUN. 
If it doesn’t come on then,
have it fixed so it will be
ready to warn you if there’s
a problem.

Summary of Contents for 2000 Sierra 1500 Pickup






































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2000 Sierra 1500 Pickup

Daihatsu S85 Wiring Diagrams preview
S85
Brand: Daihatsu Pages: 41
Daihatsu S85 Workshop Manual preview
S85
Brand: Daihatsu Pages: 268
APS Auto Parts Specialist iBoard IB-ZK406 Installation Instructions preview
iBoard IB-ZK406
Brand: APS Auto Parts Specialist Pages: 3
GMC SIERRA 2002 Manual preview
SIERRA 2002
Brand: GMC Pages: 499
Kia Amanti Owner'S Manual preview
Amanti
Brand: Kia Pages: 290
Kolpin Outdoors 25-1080 Assembly & Owners Manual preview
25-1080
Brand: Kolpin Outdoors Pages: 6
Schartec CR 4 Manual preview
CR 4
Brand: Schartec Pages: 2
Waeco MagicComfort MSH200 Installation And Operating Instructions Manual preview
MagicComfort MSH200
Brand: Waeco Pages: 108
Tusk RL-HM018R Installation Instructions And Information Manual preview
RL-HM018R
Brand: Tusk Pages: 2
Saab 12 787 887 Installation Instructions Manual preview
12 787 887
Brand: Saab Pages: 12
Meta System 900000358 Installation Technical Sheet preview
900000358
Brand: Meta System Pages: 22
Saab 32000574 Installation Instructions Manual preview
32000574
Brand: Saab Pages: 9
Conrad 85 51 49 Operating Instructions Manual preview
85 51 49
Brand: Conrad Pages: 50
Toyota 2012 Sienna Owner'S Manual preview
2012 Sienna
Brand: Toyota Pages: 779
Yakima Landing Pad 11 Manual preview
Landing Pad 11
Brand: Yakima Pages: 28
Brodit Getac T800 Quick Start Manual preview
Getac T800
Brand: Brodit Pages: 2
Saturn 2009 OUTLOOK Owner'S Manual preview
2009 OUTLOOK
Brand: Saturn Pages: 432
Ecco Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600 Manual preview
Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600
Brand: Ecco Pages: 2

Brands by name

Popular brands

Load more brands