Home
/
GMC
/
2000 Sierra 1500 Pickup
/
Owner'S Manual

GMC 2000 Sierra 1500 Pickup, Owner'S Manual, Page: 112 / 421

Share

Page: 112 / 421

GMC 2000 Sierra 1500 Pickup Owner'S Manual Download Page 112

yellow

blue

2-34

Parking Brake

To set the parking brake, hold the regular brake pedal
down with your right foot. Push down the parking brake
pedal with your left foot.

If the ignition is on, the brake system warning light will
flash. A chime will activate when the parking brake is
applied and the vehicle is moved at least 3 mph (5 km/h)
for at least three seconds.

To release the parking brake, hold the regular brake
pedal down. Pull the bottom edge of the lever, located
above the parking brake pedal, marked BRAKE
RELEASE, to release the parking brake.

If the ignition is on when the parking brake is released,
the brake system warning light will go off.

NOTICE:

Driving with the parking brake on can cause
your rear brakes to overheat. You may have to
replace them, and you could also damage other
parts of your vehicle.

If you are towing a trailer and are parking on any hill,
see “Towing a Trailer” in the Index. That section shows
what to do first to keep the trailer from moving.

«
...
110
111
112
113
114
...
»

Summary of Contents for 2000 Sierra 1500 Pickup






































































































































































































































































































































































































































Reviews:

No comments