manualshive.com logo in svg

GMC 2000 Jimmy, Owner'S Manual, Page: 368 / 430

Share
Download
GMC 2000 Jimmy Owner'S Manual Download Page 368

Scheduled Maintenance

7-7

Long Trip/Highway Intervals

Every 7,500 Miles (12 500 km): Engine Oil and Filter

Change (or every 12 months, whichever occurs first).
Chassis Lubrication (or every 12 months, whichever
occurs first). Drive Axle Service. Tire Rotation.

Every 15,000 Miles (25 000 km): Automatic

Transmission Service (severe conditions only).

Every 30,000 Miles (50 000 km): Fuel Filter

Replacement. Engine Air Cleaner Filter Replacement.

Every 50,000 Miles (83 000 km): Automatic

Transmission Service (normal conditions).

Long Trip/Highway Intervals

Every 60,000 Miles (100 000 km): Engine Accessory

Drive Belt Inspection.

Every 100,000 Miles (166 000 km): Spark Plug Wire

Inspection. Spark Plug Replacement. Positive
Crankcase Ventilation (PCV) Valve Inspection.

Every 150,000 Miles (240 000 km): Cooling System

Service (or every 60 months, whichever occurs first).

These intervals only summarize maintenance services.
Be sure to follow the complete scheduled maintenance
on the following pages.

Summary of Contents for 2000 Jimmy















































































































































































































































































































































































































































Reviews:

No comments