manualshive.com logo in svg

GMC 2000 Jimmy, Owner'S Manual, Page: 155 / 430

Share
Download
GMC 2000 Jimmy Owner'S Manual Download Page 155

2-87

Service Four-Wheel-Drive Warning Light
(If Equipped)

This light should come on
briefly when you turn on the
ignition, as a check to show
you it is working.

The SERVICE 4WD light comes on to indicate that
there may be a problem with the drive system and
service is required. Malfunctions can be indicated by the
system before any problem is apparent, which may
prevent serious damage to the vehicle. This system is
also designed to assist your service technician in
correctly diagnosing a malfunction.

Tow/Haul Mode Light (If Equipped)

This light should come on
when the tow/haul mode has
been selected.

For more information, see “Tow/Haul Mode” in 
the Index.

Summary of Contents for 2000 Jimmy















































































































































































































































































































































































































































Reviews:

No comments