GMC 1982 Light Duty Truck, Service Manual

Page: 167 / 1435

BODY 2D-5
Fig. 2D -8--G love Box
IN S TR U M E N T PANEL C O M P A R T M E N T A N D LOCK
R eplacem en t
Removal of the entire assem bly including door m ay be
accom plished by removing four screws which attach hinge
ju st below box. See figure 2D-8. The outer door panel may
be rem oved, leaving the com partm ent intact, by removal of
four screws. Access to the door stop bum per is gained by
re a c h in g into c o m p a rtm e n t opening w ith door p a rtia lly
open.
A d ju s tm e n t
E ngagem ent of lock in striker may be adjusted by
loosening striker retaining screws and moving the striker to
desired position.
OUTSIDE REAR V IE W MIRRORS
R ear view m irror installations are shown in figure 2D-
9, 2D -10 and 2D-11. Occasional tightening of m ounting and
assem bly bolts and screws will sharply decrease occurrence
of failure due to door slam m ing or road shock.
C a m p e r m irro r in sta lla tio n is sim ilar to the below
eyeline m irror installation.
Fig. 2D-9--Rear View M irro r - Base