Osicus User Guide V8
09/09/2021
Page
20
of
46
Figure 3.2.7: Device Manager
On subsequent connection of the audiometer, the USB drivers will be recognised automatically and
no user interaction will be required.
5.3 Installing the Hardware
Operation of the Osicus audiometer is controlled by software running on a Windows based
PC.
The link between PC and Osicus is by means of a standard USB cable.
The other connections on the front of Osicus, which are essential for its correct operation are:-
•
Headphone plug -
if a booth is used
, link the socket marked
“
Headphone
”
on the front of
Osicus to the booth with a stereo booth cable and connect the Osicus earphone plug to
the corresponding socket inside the booth
.
If no booth is available
, connect the red plug
directly into the socket marked right.
•
Switch - Response button plug
–
if a booth is used
, link the socket marked response on the
back of Osicus to the black socket on the booth and connect the response button plug to
the corresponding black socket inside the booth.
If no booth is available
, connect the response button plug directly into the socket marked
response.
