13
3.2.2 Network Port Setting
If the controller and the computer are connected via the Network port, set the IP
address correctly before setting the parameters. And then click the option "Ping" in
the Network port communication.
Please make sure the IP address of the controller and the control computer on the
same LAN network segment, it means the 1st-3rd segment addresses should same, but
the last segment is different. Such as: computer IP 192. 168. 0.10 and controller IP
192.168.0.6
The IP address in the computer and the control
system have to be on the same segment
，
but
different IP.
T
he IP address of control software is same as the IP address
showed on the LCD interface.
