Globus Genesy 3000, User Manual

Page: 22 / 68

22
REV.01 del 06.12.2017
Accessories
Use and storage of the electrodes and the cables.
In case of wear of cables or electrodes, they must be replaced and no longer used.
Before applying the electrodes on the skin, we suggest cleaning it.
After using the multi-purpose single patient and/or single-use electrodes, they must
be stored using their plastic film and placed in the plastic bag.
Avoid that the electrodes touch each other or that they overlie one over the other.
Once the package has been opened, the electrodes can be used for 25-30
applications.
The electrode must be always used with clean hands and they must be replaced if
they are not perfectly in contact with the skin.
The electrode must be always replaced if they are not perfectly in contact with the
skin.
If using non self-adhesive electrodes we suggest cleaning the surface with proper
cleansers that respect the requirements described in the manual.
Disposal of the device
Do not throw the device or part of it in the fire, but dispose of the product in the
specialized centers and respecting the directives in force within your country.
When the product has to be disposed of, the user can give it back to the retailer
when purchasing a new unit.
A correct separate waste collection or following what above mentioned
contribute to avoid possible negative effects on environment and health and
promote the reuse and/or recycle of materials of which the device is composed.
The illegal disposal of the product by the user involves the application of the
administrative fines according to the current regulations.
INSTRUCTIONS FOR USE
For a correct use of the device, the user should proceed as follows:
- Connect the cables to the outlets on the unit.
- Connect the electrodes to the connectors at the end of the cables.
- Place the electrodes on the skin.
Turning on
Turn on the electrostimulator by pressing the ON/OFF/OK button for 3 seconds
until hearing a sound alarm.
The unit name and software version appear on the lower right-hand corner of the
display.
Depending on the purchased model, the entries of the main menu are shown.
Use the P+ and P- buttons of the keyboard to move inside the menu: