20
3.2.5 Pairing the Mini with Android
1.
Go to
Settings
and make sure Bluetooth is turned on.
2.
Turn on the Mini by pressing its blue key.
3.
Open the GlobiLab application
.
4.
From the GlobiLab menu select “Connect Labdisc”. This menu
may be a column of three small boxes to the far right at the top of
the screen or it may be a small menu at the bottom of the screen,
near the back arrow or home button.
5.
The application will open the “Bluetooth pairing wizard” and start
searching for Mini devices.
6.
Select the Mini_xxxx where xxxx are the last 4 digits on your Mini
serial number sticker.
7.
Follow the step by step instruction:
a.
Put the Mini in “pairing mode” by pressing and
holding the Mini blue key for 3 seconds till all 6 LED
are flashing Green-RED-Green.
b.
In the pairing dialog box enter PIN
1234
. Press “Ok”.
8.
The App name will change to "GlobiLab (Minidisc_xxxx)" to
indicate connection.
Version: 20.5.15
