background image

11

Reisemobil - 06/02-2 - GLO-0005-00EN

Safety

3

3Safety

3.1

Fire prevention

3.1.1

Avoidance of fire risks

3.1.2

Fire-fighting

3.1.3

In case of fire

3.2

General

Never leave children in the vehicle unattended.

Keep flammable materials clear of heating and cooking appliances.

Lights can get very hot. When the light is switched on, there must always 
be a safety distance of 30 cm between light and flammable objects. Fire 
hazard!

Never use portable heating or cooking appliances.

Only authorised qualified personnel may make changes to the electrical 
system, gas system or appliances.

Always have a dry powder fire extinguisher in the vehicle (with at least 
1 kg capacity). The fire extinguisher must be approved, tested and close 
at hand.

Have the fire extinguisher tested at regular intervals by authorised qual-
ified personnel. Observe the date of testing.

The fire extinguisher is not included in the scope of delivery of the 
vehicle. 

Evacuate vehicle passengers. 

Cut off the electrical power supply and disconnect from the mains.

Close regulator tap on the gas bottle.

Sound the alarm and call the fire brigade.

Fight the fire if this is possible without risk.

Keep escape routes clear.

Observe the fire extinguisher instructions for use.

The oxygen in the vehicle interior is used up by breathing or the use of 
the gas cooker or other appliances. That is why the oxygen needs to be 
replaced on a constant basis. For this purpose, forced ventilations are 
fitted in the vehicle. Never cover or block forced ventilations with objects 
such as e.g. a winter mat. Keep forced ventilations clear of snow and 
leaves. There is a danger of suffocation due to increased CO

2

 levels.

Gas pipes and electric lines are laid in the floor. Never drill holes in the 
floor or insert any any screws. That could cause a gas explosion, an 
electrical shock or a short circuit due to damage to a cable.

Summary of Contents for 2 Win



































































































Reviews: