GlobalTime NTP Products
20
3.7.1
The login interface
The login screen is as shown in the Figure 1.1. The users must login the system and be
authenticated before configuring the server. The figure below is the main interface after a
successful login.
welcome window
The configuration item includes: (1) Network Settings (2) NTP settings (3) SNMP settings (4)
Hot Standby (5) NTP status (6) GPS status
3.7.2
Network settings
Click
“
Network settings
”
in the navigation bar, it will enter the network configuration item.
in the navigation bar click on "Network Settings".
Network settings are divided into DEVICE, BOOTPROTO, IPADDR, NETMASK and
GATEWAY. They represent the network card equipment, starting mode, IP address, subnet
mask and gateway. You can select the network card settings by clicking the drop-down
menu under the DEVICE item, as shown below:
