7
Note: In case you would like to separate the screen and the single-sided clock, please use
special tools since the plastic hooks may not bear rough force. Any damage in that case is on
the user's account.
3.5 Wall Mounting
Only screws are needed. See the picture below:
There is 248 millimeters between the two hanging holes on the clock rear. The diameter of the
cantilever screw head should be within6-12 millimeters, and
the diameter of the screw stem less than 6 millimeters. Work will be done by hanging the
clock on the screws.
If the wall is newly decorated, please make sure that the cable required has been led out from
where the clock screen is to be installed; If not, we suggest leading in the cable through the
hole above the clock screen, and connect with the corresponding port.
Summary of Contents for Double-sided Display
Page 2: ...1 Double sided Display...
