Globalstar STX3, User Manual, Page: 12 / 32

10 10
USING THE STX3 DK-BLE SMARTPHONE APP WITH THE DEV KIT
After installing the STX3DK-BLE smartphone app on your Android or iPhone device, you will need to have the
Dev Kit powered before running the STX3DK-BLE app. The smartphone app will start up and begin scanning over
Bluetooth, searching for Dev Kits within BLE range. Select the desired Dev Kit’s ESN and the smartphone app will
establish communication with the Dev Kit.
The following three screen shots show the smartphone app booting and scanning for Dev Kits.
When an ESN is selected, the main screen of the STX3DK-BLE smartphone app will be displayed. On the main
screen, the following items will be shown:
a)
Send Data Command with its associated Send button
b) The temperature and humidity sensor readings (with its associated Update button)
c) The STX3 module’s ESN
d) Firmware Version of the Dev Kit
e) Hardware Version of the Dev Kit
Figure 5 - STX3DK-BLE App Boot-Up Screens