Globalstar STX3, User Manual, Page: 21 / 32

19 19
The STX3 module has been labeled with its own FCC and Industry Canada (IC) ID numbers, and if the FCC/IC ID
numbers are not visible when the module is installed inside another device, then the outside of the finished product
into which the module is installed must also display a label referring to the enclosed module:
Contains Transmitter Module FCC ID: L2V-STX3 IC: 3989A-STX3
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
RF Exposure Notice: This equipment complies with the FCC
RF Exposure Limits. A minimum of 20 centimeters (8 inches)
separation between the device and the user and all other persons
should be maintained.
AVIS: Cet équipement est conforme aux RSS-102 Limites
d’exposition RF. Un minimum de 20 centimètres (8 pouces) entre
l’appareil et l’utilisateur et toutes les autres personnes devrait être
maintenue.
Transmit Frequencies: 1611.25 Mhz - 1618.75 Mhz (4 Channels)
Max Power Out: 19.8 dBm conducted
WARNING: Changes or modifications not expressly approved by
Globalstar may render the device non-compliant to FCC and other
regulatory body standards for operation and may void the user’s
authority to operate the equipment.
Hereby, Globalstar declares that this STX3 is in compliance
with the essential requirements and other relevant provisions
of Directive 2014/53/EU. The declaration of conformity may be
consulted at www.globalstar.com/regulatory
Cet appareil numérique de classe B est conforme à la norme
NMB-003.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment OFF and ON, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Anatel Certification stamp of the STX3 module for operation
in Brazil:
Portuguese
English
Produto não acabado, de uso interno, cuja
integração em outros equipamentos pode
requerer nova certificação.
Unfinished product, for internal use, the
integration of which into other equipment may
require further certification.
FCC ID: L2V-STX3
ICES-003/(A/B)
IC:3989A-STX3
Complies with FCC standards.
FOR HOME OR OFFICE USE
The STX3 has been so constructed that the product complies with
the requirement of Article 10(2) as it can be operated in at least
one Member State as examined and the product is compliant with
Article 10(10) as it has no restrictions on being put into service
in all of the EU except Ireland. The STX3 cannot be marketed in
Ireland.
Not to be Marketed in Ireland
IE