11
11
The following is an image of the app main screen after it has established communication with the Dev Kit.
Pressing Update button will update the Dev Kit’s temperature and humidity readings in real time.
The STX3DK-BLE app communicates with the STX3 module in the same manner as if the Send Data command was
issued from the serial command interface. Data values can be entered in the “Send Data Command” box. The value
entered must be hexadecimal digits and correlate to the payload of the STX3’s Send Data command. See the STX3
User Manual for details on the Send Data command.
Pressing the Console button at the top right of the main screen will display the Send Commands screen. A text line
is displayed along with its associated Send command button. Entering “?” in the send command line will bring up a
list of supported commands. It is recommended to review the STX3 User Manual for additional information on STX3
commands.
Figure 7
shows an image of the commands list displayed in the smartphone app when a “?” is entered in
the send data command line.
Figure 6
- STX3DK-BLE App, Main Screen
Figure 7
- STX3DK-BLE App Command List
Summary of Contents for STX3
