6
ST150M User Manual
Confidential & Proprietary Information
9150-0125-01 R-1
2.2 QUICK START/CONFIGURATION GUIDELINES
To get up and running, the following details both mandatory and optional steps:
1. Globalstar offers an ST150M Dev Kit that provides a quick way to power-up the module and communicate with modem AT
command interface via physical UART, Globalstar Mobile App, or BLE Nordic UART Service (NUS)
2. Create an Account
• Create a VAR account and access the Globalstar IoT Data Management Portal (Requires VAR/VAM BackOffice endpoint
to route device traffic to)
• Or, work with a Globalstar VAR to setup billing, activate your module, and create a user login account (Requires
backoffice endpoint to route device traffic to)
• Or, use Davra’s IoT platform to setup billing, activate your module, and direct device traffic to your Davra account (Does
not require separate backoffice endpoint)
3. Optionally, if using 2A or 2B, integrate backoffice APIs with the Globalstar Simplex API for programmatic API access to
billing and device management APIs
4. Optionally, if using 2A or 2B, access Globalstar’s Data Warehouse Portal for real-time debugging of device traffic
5. Get the Globalstar Mobile App and use your account credentials from step 2 to login, configure your device, and sync
device activation status
6. Optionally, send a raw or truncated message via modem AT commands to initiate device OTA traffic
2.3 BLOCK DIAGRAM
The ST150M Block Diagram illustrates the overall module system.
FIGURE 3 – OVERALL MODULE SYSTEM
