STEP 1: REGISTER YOUR ACCOUNT
1. To register your account, open the Welcome to Globalstar e-mail from
[email protected] and click
Register Now
.
2. Follow the on-screen instructions to register your account.
STEP 2: SETTING UP THE SAT-FI2 APP
1. On your iOS or Android device, download
and install the Sat-Fi2 App from either the
Apple App Store or Google Play Store.
2. Ensure your device has an LTE or Wi-Fi
connection and open the Sat-Fi2 App. The
App will require the downloading of internal
applications necessary for setup. Do not
close the Sat-Fi2 App during this process.
3. A WELCOME screen will be displayed,
select
LET’S GET STARTED
. Start the
configuration process by selecting
QUICK
START
OR
ADVANCED SETUP
and follow
the on-screen instructions (see Figure 1).
Wi-Fi and Password Information
• Default Wi-Fi name:
satfi2_<xxxxxx>
(where xxxxxx is the last 6 digits of the ICCID)
• Default Wi-Fi Password:
satfi1234
NOTE:
A new firmware update may be available upon activation. An Advanced Setup profile
with admin privileges is required to check for and perform firmware updates. See User Guide
for instructions on how to make a user profile an admin.
STEP 3: TEST THE SAT-FI2 REMOTE ANTENNA STATION CONNECTION
Make a satellite call to test and confirm the Sat-Fi2 Remote Antenna Station system is
configured and operational.
1. With the Sat-Fi2 RAS fully installed and powered in your vehicle, move the vehicle to an
area where the Magnetic Mount Helix antenna has a 360° clear view of the sky with no
obstructions (buildings, trees, etc.). See Figure 2.
2. Open the Sat-Fi2 App and verify that both the and icons are displayed on the Status
Bar. If the icons are not displayed you may not have a clear view of the sky.
NOTE:
The Sat-Fi2 RAS can take up to 3 to 5 minutes to power on, boot up, and begin
establishing a satellite/ gateway connection. All three LED’s will sequentially blink green
while powering on/booting up. Once the Sat-Fi2 RAS has booted up, the Satellite LED
will blink RED until the Sat-Fi2 RAS is registered with a gateway. A GPS fix is needed to
register with the gateway.
3. In the
Application Menu
select .
4. Enter the telephone number you wish to call, or choose a contact, and select .
MOBILE DEVICE NUMBER (MDN) AND ICCID
In order to activate your Sat-Fi2 RAS and register your Globalstar My Account Profile, you will
need to have access to the ICCID number found on the Sat-Fi2 RAS - Right Panel. Your MDN
(telephone number) will be assigned during activation.
ACTIVATE THE SAT-FI2 REMOTE ANTENNA STATION (RAS)
Sat-Fi2 Remote Antenna Station requires activation, please make
sure you have an active subscription. If you do not have an active
subscription or encounter issues with your device, please access
the User Guide by going to
Globalstar.com/Sat-Fi2RASSupport
.
FIGURE 1
Android
iOS
NOTE: For initial setup, a home/business Wi-Fi Internet connection
will be required to complete Step 1 and Step 2.
FIGURE 2
RESTRICTED VIEW
OF THE SKY
MAY NOT FUNCTION PROPERLY
CLEAR VIEW OF THE SKY
CORRECT
Summary of Contents for Sat Fi2
Page 1: ...QUICK START GUIDE GUIDE DE DÉMARRAGE RAPIDE ...
Page 2: ......
