CHAPTER 6 – SERVICE
Computer Rear Panel Diagram
Port Description
1
USB 1
For the USB Game Dongle.
2
Ethernet Port
The Ethernet port is used to Link Cabinets for Multi-Player games.
3 U5.1AMP
The u5.1AMP connect to the 3 audio ports on the computer. Each audio port is
used for a specific channel on the cabinet speakers.
4
Immersion Force
Feedback
The Immersion Force Feedback boards connect to the USB Port 2 on the
computer. The Force Feedback motor and steering wheel then connect to the
Immersion boards.
5
DB-37 and DB-25
The USB I/O card connects to the Operator Buttons, Coin Mechs, and Control
Assemblies on the cabinet.
6
USB 3 to USB I/O
card
The USB Port on the USB I/O card connects to USB Port 3 on the computer.
7
Modem Line Out
The right side plug is the Modem Line out port that connects to the analog
phone line (for future use).
8 Video
Out
The 15-pin video port connects to the Super VGA Monitor cable inside the
cabinet.
9
AC Power
AC Power input must use a IEC 14 connector.
56
GLOBAL
VR
040-1201-01 Rev. C 5/28/2004
