14
5. Network Configuration
5.1. Internet
This section allows user to configure the CPE operation mode, device name, MTU and etc. The
CPE default Operation Mode is Router, and the LAN PC connected to device LAN port will
obtain IP address via DHCP server of the device. The default MTU Size is 1500, user can
modify the MTU Size if necessary.
Note when setting the connection mode as L2 Bridge or L3 Bridge, there will be a warning
window pops up. Remember the management IP address 192.168.0.1 and click the “ok” button.
When the user wants to manage the home page again, the PC should be configured a static IP
address as 10.1.1.X manual in order to visit the CPE managing page
5.2. LAN Setting
The LAN setting allows user to specify the device LAN IP, DHCP server setting, Local DNS and
etc. When Router mode is selected, the DHCP server should be enabled by default.
User is advised to leave the default setting unchanged for quick configuration and smooth
device operation.
