11
Note: After configure any parameters of the device, you must click the “Save & Apply” button to
save the configuration. Otherwise the configuration will not take effect.
4.3. PLMN Selection
The user can add and configure the PLMN list to restrict the CPE to attach. The CPE will
attach to network according to the PLMN priority assigned.
4.4. Cell Selection
The cell selection menu is used to configure how CPE will select the best cell. User can
configure the “Auto Select” mode to select cell based 3GPP standard. When configured with
“preferred Listing”, user add the desired cell ID to the list and the CPE will attach to the
appropriate cell after a full scan.
