Global Payments Heartland EMV Page 1 Assembly Instructions Download

Page: 1 / 2

Assembly Instructions

EMV Mobile Tablet

heartland.us

Remove the faceplate from the enclosure. Do this by

inserting a coin or similar flat tool into the corner notches

and turn 90º to force the faceplate apart from the

enclosure.

Insert the iPad mini into the enclosure. Ensure that

lightning port makes connection to the lightning bayonet

first before inserting the rest of the tablet.

Open the card reader compartment using the two clips

located on either side of the door. Once open, insert the

WiseCube device into the opening. Please ensure that the

NFC/Contactless logo is facing DOWN towards the back

of the enclosure. Plug in the pre-installed USB cable to the

Wisecube USB port.

Reinstall the faceplate back onto the enclosure. There

should be an audible “snap” once the seal has been made.

Inspect all sides of the device to ensure there are no gaps

in the seal.

Tip: It is recommended to pair the payment device to the iPad before installation.

Summary of Contents for Heartland EMV

Page 1: ...ing the rest of the tablet 3 2 Open the card reader compartment using the two clips located on either side of the door Once open insert the WiseCube device into the opening Please ensure that the NFC...

Page 2: ...icator Lights 90 100 75 89 50 74 25 49 5 24 0 4 90 to 100 0 to 100 0 to 89 90 100 0 89 0 100 Internal Battery LED Connected to Power Source or Battery Power iPad Battery LED Connected to Power Source...