background image

1

Electronic Window Air Conditioner

062019

User's manual

Manual del usuario

Manuel de l'utilisateur

Customer Service

US: 1-800-645-2986

Servicio de atención al Cliente

US: 1-800-645-2986

Service à la clientèle

Canada: 888-645-2986

•  Plug into a grounded 3 prong outlet.
•  DO NOT remove the ground prong.
•  DO NOT use a plug adapter.
•  DO NOT use an extension cord.
•  Unplug the air conditioner before servicing
• Two people are recommended to lift and install the unit.

Refrigerant R32 is used. Contact a qualified service

technician for maintenance of the refrigerant.

The electrical ratings for your air conditioner are listed on

the model and serial number label located on the front,

left side of the unit (when facing front).

Recommended Ground Method

For your personal safety, this air conditioner must be

grounded. This air conditioner is equipped with a 3 prong

power supply cord and a grounded plug. To minimize the

possibility of electrical shock, the cord must be plugged

into a 3 prong outlet and grounded in accordance with

all local codes and ordinances. If a 3 prong outlet is not

available, it is the customers responsibility to have a

proper 3 prong outlet installed by a qualified electrician.

It is the customers responsibility:

•  To contact a qualified electricia

n

•  To assure that the electrical installation is

adequate

 

and in conformance with the National

Electrical Code,

 

ANSI/NFPA 70 - latest edition, and

all local codes

 

and ordinances.

LCDI Power Cord and Plug

This air conditioner is equipped with an LCD (Leakage 

Current Detection and Interruption) power cord that is 

required by UL. This power supply cord contains state-

of-the-art electronics that sense current leakage. If the 

cord is damaged and leakage occurs, power will be 

disconnected from the unit.
The test and reset buttons on the LCDI plug are used to 

check if the plug is functioning properly. To test the plug:
1. Plug power cord into a grounded 3 prong outlet.
2. Press RESET (on some units a green light will turn on).
3.  Press the TEST button, the circuit should trip and cut

all power to the air conditioner (on some units a green

light will turn off).

4.  Press the RESET button for use. You will hear a click

and the A/C is ready for use.

Model 293068 

 

6,000 BTU, Cool Only, 115V

        WARNING

Read all instructions before use. 

To reduce the risk of fire, electric 

shock, or injury to persons when 

using this appliance, follow the 

following precautions:

Summary of Contents for 293068














Reviews: