globalindustrial.ca
Distribucion Industrial Globales S DE RL DE CF
User's manual
Manual del usuario
Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
México: 01.800.681.6940
Service à la clientèle
Canada: 888-645-2986
1
052416
24 Inch Internal Orbital
Pedestal Fan
Model 292606
READ & SAVE THESE
INSTRUCTIONS
CAUTION:
Read and follow all instructions before operating fan.
Do not use fan if any part is damaged or missing.
WARNING:
• To reduce the risk of fire or electrical shock, do not expose to
water or rain.
• To reduce the risk of fire or electrical shock, do not use this fan
with any solid state speed control device.
• To reduce the risk of injury, disconnect
from power supply before servicing.
• If the power supply cord is damaged, contact a qualified service
center electrician to install an appropriate replacement cord.
• The appliance is not intended for use in locations where special
conditions prevail, such as the presence of a corrosive or
explosive atmosphere (dust, vapor or gas ).
• This appliance must be used safely and with supervision.
Keep away from children or unauthorized users. Never leave
unattended.
• This fan should not be operated outside.
TO ADJUST AIRFLOW UPWARD OR DOWNWARD:
Tilt fan head to
the desired angle. This high velocity fan can be used alone or in conjunction with
air conditioning. Rotating the fan head upward serves to pull air from the floor
and circulate it throughout the entire room.
SPEED CONTROL:
For stationary operation select fan speed by turning the
switch to the left to either High (3) - Medium (2) - Low(1). 0 is off position.
CLEANING:
WARNING:
Unplug from electrical supply source before
cleaning.
1. Use soft damp cloth to clean, then wipe with dry cloth.
2. Do not use a cleaning solution that is harmful to paints or
plastics.
OPERATING INSTRUCTIONS
SIZE VOLT AMP WATT SPEED
RPM
CFM HP
24"
120V
1.8A
200W
3
1095/965/840
7755 1/8
INTERNAL ORBITAL FUNCTION:
The blade will orbit internally in this
mode while the fan is running at any
speed. Turn the switch to right to either
High (3) - Medium (2) - Low(1).
0 is off position.
