102 - 122
1.1
.
0
- IDENTIFICATION
1 / 1
from
2000
to
••••
WORKSHOP MANUAL
page
1.1 IDENTIFICATION
a) Machine
Each machine has a label attached
(1)
in the battery
area which shows the technical specifications, the
model and the serial number.
The model and serial number must be shown on
each repair sheet when requests are made
under guarantee, and are indispensable for
spare part orders.
b) Transmission (Rear axle)
The transmission unit (both mechanical and hydrosta-
tic) is made up of an engine block including the rear
axle. This unit is made by another manufacturer to our
precise technical specifications which differentiate it
from similar items by this Manufacturer.
The serial number on the label (2) clearly identi-
fies the product and its specifications. This num-
ber must always be quoted when requesting
spare parts or any information from the Manu-
facturer.
c) Engine
The engine is made to precise technical specifications
which differentiate it from similar items by this Manu-
facturer.
The serial number on the label clearly identifies
the product and its specifications. This number
must always be quoted when requesting spare
parts or any information from the Manufacturer.
3/2002
2
1
<= ... RET ... <=
