N...92
WORKSHOP MANUAL
VERTICAL POSITIONING
2.4
0
1 / 1
page
from
2007
to
••••
© by GLOBAL GARDEN PRODUCTS
2.4 VERTICAL POSITIONING
WARNING! Two people will be needed for this
operation. When lifting and tipping backwards,
only solid parts should be gripped (steering
wheel, frame, rear plate, etc.) and NEVER parts
of the bodywork in plastic.
The tank must be checked before putting the lawn-
tractor in a vertical position to make sure that there
is no more than 2 litres of fuel inside.
To assure full stability, the lawn-tractor must only be
rested on the points shown, inserting a block
(1)
of
about 120 mm under the lower edge of the plate
and taking care not to damage the parts in plastic
and the grass-catcher mounts
(2).
WARNING! Before carrying out any type of work
make sure that the machine is completely sta-
ble, and avoid operations that could cause it to
fall over.
WARNING! Be just as careful when putting the
machine back on a flat surface; two people are
needed for this operation.
4/2007
1
1
120 mm
1
<= ...BACK... <=
Summary of Contents for N 92 Hydro Series
Page 1: ......
