1 / 1
2.4.
0
VERTICAL POSITIONING
General informations:
---
Related topics:
---
1
150 mm
1
1
WARNING! Two people will be needed for this
operation. When lifting and tipping backwards,
only solid parts should be gripped (steering
wheel, frame, rear plate, etc.) and NEVER parts
of the bodywork in plastic.
The tank must be checked before putting the lawn-
tractor in a vertical position to make sure that there is
no more than 2 litres of fuel inside.
To assure full stability, the lawn-tractor must only be
rested on the points shown, inserting a block (1) of
about 150 mm under the lower edge of the plate and
taking care not to damage the parts in plastic and the
grass-catcher mounts (2).
WARNING! Before carrying out any type of work
make sure that the machine is completely stable,
and avoid operations that could cause it to fall
over.
WARNING! Be just as careful when putting the
machine back on a flat surface; two people are
needed for this operation.
MODEL YEAR 2016
N…102 Hy
N…102
WORKSHOP MANUAL
WORKSHOP MANUAL
BACK
