© by GLOBAL GARDEN PRODUCTS
3/2015
72FL hydro
7.3
.
1
- SAFETY MICROSWITCHES
OPERATION CHECK
1 / 1
쑮
쑮
쑱
쑱
WORKSHOP MANUAL
pag.
MODEL YEAR 2016
7.3 SAFETY MICROSWITCHES OPERATION CHECK
This check is done by disconnecting the connector and
using the tester in Ohmmeter mode. This ope ration
should be done, without the driver on board, by mak-
ing contact with the ferrules on the contacts of the con-
nector of the wiring (1) and should give this result:
ENGINE STOP
This operation must be done by keeping the connec-
tor (2) attached and should give this result:
N° Contacts
Tester reading and condition
GRASS-CATCHER ATTACHED MICROSWITCH
10 - 6
∞
(without g.catc.)
O (with g.catcher)
SEAT MICROSWITCH
10 - 14
∞
(absent)
O (seated)
PARKING MICROSWITCH
10 - 17
O (free)
∞
(engaged)
BLADE SWITCH
10 - 16
∞
(engaged)
O (disengaged)
“IN NEUTRAL” SIGNAL
10 - 7
∞
(drive)
O (neutral)
GRASS-CATCHER FULL MICROSWITCH
13 - Earth
O (full)
∞
(empty)
REVERSE GEAR MICROSWITCH
10 - 15
∞ (Pressed)
O (Released)
REVERSE CONSENT PEDAL MICROSWITCH
8 - 9
O (Pressed)
∞ (Released)
STARTER UNIT
+ Battery - 11
∞
(OFF)
O (ON)
O (START)
+ Battery - 12
∞
(OFF)
∞
(ON)
O (START)
N° Contacts
Tester reading and condition
3 - Earth
O (Always)
2
3
1
11
2
12
3
13
4
14
5
15
6
16
7
17
8
18
9
19
10
20
1
18
17
16
15
14
13
12
11
20
19
9
8
7
6
5
4
3
2
1
10
<= ...BACK... <=
