TECHNICAL SPECIFICATIONS
Vulcan 2 DS
Detector Sounder/ Beacon
ORDER CODE
DESCRIPTION
VULCAN 2 DETECTOR SOUNDER
VULCAN 2
SOUNDER WITH ISOLATOR
VULCAN 2 DETECTOR SOUNDER WITH BEACON
VULCAN 2 DETECTOR SOUNDER WITH BEACON WITH ISOLATOR
VULCAN 2 DETECTOR BEACON
VULCAN 2 DETECTOR BEACON WITH ISOLATOR
LID FOR VULCAN 2
TRANSPARENT LID FOR VULCAN 2
DETECTOR
VULCAN 2 DS
VULCAN 2 DSI
VULCAN 2 DSB
VULCAN 2 DSBI
VULCAN 2 DB
VULCAN 2 DBI
VULCAN 2 L
VULCAN 2 LT
NOTE:
Add to sounder/ beacon current when active, conventional detector current in alarm which is internally limited to a maximum of 12 mA.
Loop In/Out
Address|A|B|S
- V
ol +
T
-
Tone
T
M
- Mode
M
Loop In/Out
Detector
Sounder
LOOP
OUT
LOOP
RETURN
PANEL
Detector
Base
Volume
Adjustment
red wire
black wire
Normal Sounder
Optical Detector
T M
1 2 3 4
Heat Detector
T M
1 2 3 4
Mode Selection
T
- Tone
M
- Mode
T M
ALTERNATING
LOW-FREQUENCY TONE
800-1000 Hz
T M
T M
T M
T M
SWEEPING
TONE
800-1000 Hz
ALTERNATING
HIGH-FREQUENCY TONE
2.7 KHz-3.2 KHz
CONTINUOUS
TONE
800 Hz
CONNECTIONS AND TONE/MODE SETTINGS
When connecting the conventional detector always follow the manufacturer’s instructions to ensure proper operation.
NOTE:
If Mode (M) SW 3 & SW 4 are set to OFF, the device will behave like a
normal addressable sounder
.
In this mode no detectors, conventional or analogue addressable can be connected to this sounder unit.
The
shadow sounder mode
will still be available by placing switch no. 8 in the OFF position.
SOUNDER
2.5 mA
5 mA
2.5 mA
2.5 mA
SOUNDER/BEACON
3.3 mA
6.4 mA
3.3 mA
3.3 mA
SOUNDER W. ISO.
2.65 mA
5.15 mA
2.65 mA
2.65 mA
SOUNDER/BEACON W. ISO.
3.45 mA
6.55 mA
3.45 mA
3.45 mA
SUPPLY VOLTAGE
LOOP CURRENT - QUIESCENT
LOOP CURRENT - SOUNDER/BEACON ACTIVE
Sweeping Tone 800-1000 Hz
Alternating High Freq. 2.7-3.2 KHz
Continuous Tone 800 Hz
Alternating Low-Freq. 800-1000 Hz
LOOP CURRENT - BEACON
MAXIMUM SOUNDER OUTPUT
CABLE SIZE
RESET/START-UP TIMES
PROTECTION CATEGORY
COLOUR / CASE MATERIAL
OPER. TEMPERATURE / MAX. HUMIDITY
DIMENSIONS / WEIGHT
Loop Powered - 20V to 30V DC
430 uA & 550 uA with isolator - add conventional detector quiescent current
Beacon 2.5 mA Beacon with isolator 2.7 mA
97 dB (@ 1 meter - 30 V DC)
0.5-2.5 mm²
20 seconds max.
Type A - Indoor Use - Rating IP21C
White or Red / ABS
o
o
-10 C to 55 C / 95% RH Non-Condensing
100 (D) x 50 (H) mm inc. base / 144 g inc. base
MADE IN PORTUGAL - EU
ma_vulcan2ds_01_010002_en_220103
GLOBAL FIRE EQUIPMENT S.A.
Sítio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z, 8150-016 São Brás de Alportel - PORTUGAL |
Tel:
+351 289 896 560
Sales:
Technical Support:
www.globalfire-equipment.com