50
11 HDD MANAGEMENT
11.1 Managing HDDs
A newly installed hard disk drive (HDD) must be first initialize before it can be used with your
DVR. Initializing the HDD will erase all data on it.
To initialize a HDD:
1. Enter the HDD Management menu by clicking Menu > HDD Management.
2. Select HDD to initialize.
3. Click the Init button.
4. Select OK button to begin initialization. After the HDD has been initialized, the status of the
HDD will change from No to Yes.
To check the status of a HDD:
1. Enter the HDD Management menu by clicking Menu > HDD Management.
2. The status of your HDD is listed under the
Status
column. If the status is listed as
Yes
, the
HDD is in working orde
r. If the HDD is Uninitialized, you will need to
initialize it before it can be
used in your DVR. Please refer to
Initializing HDDs
for further instructions.
Summary of Contents for RD8504C
Page 1: ...1 RD8504C H 264 LAN DVR User Manual Version 1 0 1...
Page 49: ...49...
Page 60: ...60 4 Click Cancel to exit out of menu...
Page 68: ...68...
